CHARGER SPECIFICATIONS
The Golfworkshop - UK
 HOME   SHOP   CONTACT

 

BACK TO BATTERY PAGE

CLICK ON PICTURE FOR SUPERSIZE VIEWS


 

100560
4 amp Charger
 

 

 

 

 

 

 

 

   This is a 4 amp charger especially designed for lead acid batteries used in golf from 16 to 40amp hours. It comes with a T bar connector for interconnect type fittings (ref 3038)

The mains input lead is 1.85m long and the output cable is 1m long

Standard features included

  • Full current limit – the charger will not give more than its rated output
  • Slow start – there is a short delay after the battery is connected before charging commences, this is to ensure that a secure connection has been made
  • Reverse polarity protection – the charger is protected against incorrect battery connection
  • Low voltage pick-up – the charger will recharge deeply discharged batteries
  • Self discharge protection – the battery will not self discharge through the charger if it is connected with the mains disconnected
  • Overall timer – an overall timer is included in the design and will only operate if the battery fails to reach the first constant voltage level
  • Overvoltage protection – in the unlikely event of the charger developing a fault which causes the output voltage to rise to more than 15 volts the charger will be shut down
  • Battery maintenance – the battery may be safely left on charge in order to maintain the battery in a fully charged condition
SORRY NOT AVAILABLE

100550
British Made
4 amp Charger

 

 

 

 

 

 

 

   This is a British made 4 amp charger especially designed for lead acid batteries used in golf up to 36 amp hours. It comes with a T bar connector for interconnect type fittings (ref 3038)

The mains input lead is 1.85m long and the output cable is 1.1m long.

Standard features included

  • Full current limit – the charger will not give more than its rated output
  • Slow start – there is a short delay after the battery is connected before charging commences, this is to ensure that a secure connection has been made
  • Reverse polarity protection – the charger is protected against incorrect battery connection
  • Low voltage pick-up – the charger will recharge deeply discharged batteries
  • Self discharge protection – the battery will not self discharge through the charger if it is connected with the mains disconnected
  • Overall timer – an overall timer is included in the design and will only operate if the battery fails to reach the first constant voltage level
  • Overvoltage protection – in the unlikely event of the charger developing a fault which causes the output voltage to rise to more than 15 volts the charger will be shut down
  • Battery maintenance – the battery may be safely left on charge in order to maintain the battery in a fully charged condition

100840
British Made
4 amp Charger
 

 

 

 

 

   This is a British made charger suitable for charging all Hill Billy type batteries up to 21ah. with Torberry connections

This 12 volt 2amp charger is British Made and microprocessor controlled to optimise the performance of your battery

This unit is fully protected against damage caused by short circuit or reverse polarity

Manufactured to BSI Class II

NOT suitable for the new Terrain trolley

 

 

 

 

 

 

    
This is a 4 amp charger especially designed for lead acid batteries used in golf from 16 to 40amp hours. It comes with a T bar connector for interconnect type fittings (ref 3038) The mains input lead is 1.85m long and the output cable is 1m long. Standard features included • Full current limit – the charger will not give more than its rated output • Slow start – there is a short delay after the battery is connected before charging commences, this is to ensure that a secure connection has been made • Reverse polarity protection – the charger is protected against incorrect battery connection • Low voltage pick-up – the charger will recharge deeply discharged batteries • Self discharge protection – the battery will not self discharge through the charger if it is connected with the mains disconnected • Overall timer – an overall timer is included in the design and will only operate if the battery fails to reach the first constant voltage level • Overvoltage protection – in the unlikely event of the charger developing a fault which causes the output voltage to rise to more than 15 volts the charger will be shut down • Battery maintenance – the battery may be safely left on charge in order to maintain the battery in a fully charged condition

 

 

 
 

BACK TO BATTERY PAGE