

MECHANICS
The
Golfworkshop - UK


PLEASE CHOOSE POSTAGE OPTION FOR
EITHER UK OR EU DELIVERY
Left
clutch is on the left side as you walk behind the trolley

These clutches will not
fit the wheels with the
integral clutches:
|
|
(Ref. 3240L) Compatible
- From the
original British supplier
Before you fit
the clutches to the axle it is worth examining the axle blocks held
in place by the rivet through the frame near each clutch. These are
the black plastic mouldings under each side of the chassis and the
axle runs through them. Wiggle the axle up and down and if the axle
block holes are elongated they should be replaced. Failure to
replace them will mean the axle can move up and down excessively and
will cause wear and tear on the gearbox. Far cheaper to replace the
axle blocks, 100510KIT (Ref: 3022KIT) than another gearbox.
|
|

These clutches will not
fit the wheels with the
integral clutches:
|
|
(Ref. 3240R) Compatible
- From the
original British supplier
|
|

These clutches will not
fit the wheels with the
integral clutches:
|
|
(Ref. 3240LR) Compatible
- From the
original British supplier
|

|
|
|

|
|
|

|
|
|
 |
|
|
|

|
|
51661 Pin Punch (3mm) to remove Clutch or Gearbox roll
pins
Air hardened chrome
vanadium steel for long life, ground tip with tempered head
- 6" overall length
|

|
|
|

|
|
|

|
|
|

|
|
Before you fit the clutches to the axle it is worth examining the axle blocks
held in place by the rivet shown in These are the black plastic mouldings under
each side of the chassis and the axle runs through them. Wiggle the axle up and
down and if the axle block holes are elongated they should be replaced. Failure
to replace them will mean the axle can move up and down excessively and will
cause wear and tear on the gearbox. Far cheaper to replace the axle blocks,
100510KIT (Ref: 3022KIT) than another gearbox
|
|

INCLUDES FLEXIBLE COUPLING
The flexible coupling
is the "cush drive" connecting the motor to the gearbox |
|
Before you fit the clutches to
the axle it is worth examining the axle blocks held in place by the rivet shown
in These are the black plastic mouldings under each side of the chassis and the
axle runs through them. Wiggle the axle up and down and if the axle block holes
are elongated they should be replaced. Failure to replace them will mean the
axle can move up and down excessively and will cause wear and tear on the
gearbox. Far cheaper to replace the axle blocks, 100510KIT (Ref: 3022KIT)
than another gearbox
|
| |
|
|
 |
|
Before you fit the clutches to
the axle it is worth examining the axle blocks held in place by the rivet shown
in These are the black plastic mouldings under each side of the chassis and the
axle runs through them. Wiggle the axle up and down and if the axle block holes
are elongated they should be replaced. Failure to replace them will mean the
axle can move up and down excessively and will cause wear and tear on the
gearbox. Far cheaper to replace the axle blocks, 100510KIT (Ref: 3022KIT)
than another gearbox
|

|
|
|
 |
|
|
|
|